Super strong epoxy resin AB adhesive, 805 two component fast curing epoxy resin structural adhesive

SD805 fully transparent is a two component fast curing epoxy resin structural adhesive prepared using advanced technology and process. It has the main advantages of transparency, environmental protection, and high-strength bonding, good toughness, water resistance, impact resistance, and good acid and alkali resistance, as well as high and low temperature (-60-150 ℃) electrical insulation. Suitable for bonding various high-end ceramics, granite, metal, crystal jade, high-end handicrafts, sports goods, leisure and entertainment equipment, luxury furniture decoration, digital technology products manufacturing and repair, all bonded products are perfect and traceless.

 

Characteristics of Super Strong Epoxy Resin AB Adhesive

1. Component 1:1
2. Fixed time 5-8 minutes
3. Thixotropy, no vertical flow, no smoke when gel
4. Shrinkage, low odor, solvent-free system
5. Quick positioning without the need for welding, mechanical fasteners, or rivets

 

Super strong epoxy AB adhesive is used for bonding and repairing materials such as mobile phones, high-end porcelain, entertainment equipment, bonding metal, plastic, rubber, wood, glass, ceramics, lighting, crystals, gemstones, jade, electronic appliances, handicrafts, etc. It is a good helper for household and industrial adhesives.

 

Usage method of super strong epoxy resin AB adhesive

1. The surface of the adhesive should be kept clean and dry, and metal objects should be cleaned with acetone or other solvents.
2. Mix and stir the A/B components in a 1:1 ratio and evenly apply them to the surface of the adhesive.
3. The mixed gel is used up within 2 minutes, and the gel automatically solidifies after a timeout. It initially solidifies at room temperature for 5 minutes and reaches its optimal strength within 12 hours.

 

Executive standard for super strong epoxy resin AB adhesive

Complies with GB 33372-2020 (VOC) volatile organic compound certification, REACH EU testing standards, and the enterprise has passed UL certification for flame retardancy grade E358706, ISO14001:2015 certification, ISO9001:2015 certification. The cited standard is HG/T3947-2007 single component room temperature vulcanization silicone adhesive/sealant, and has passed the national high-tech enterprise certification. Our products have passed 1000 hours of cold and hot impact testing, 1000 hours of dual 85 (high temperature and humidity) testing, and 1000 hours of high temperature aging testing, committed to providing reliable thermal conductivity solutions for industries such as automobiles, communication, and security.

 

Application industry

Digital electronics, office equipment, instruments, communication equipment, security equipment, electric tools

 

Application Description of Super Strong Epoxy Resin AB Adhesive

When mixing glue, A: B should be mixed in a 1:1 weight ratio, and the glue can be applied after being thoroughly stirred and evenly mixed. The thickness of the adhesive layer should preferably be 0.05mm. The adhesive after application should be immediately assembled and tightly clamped, and uniform contact pressure will ensure maximum bonding strength. To achieve the highest mechanical strength, the material surface can be polished or sandblasted, and then the surface dust and oil stains can be wiped with a special solvent. It is necessary to apply adhesive on both sides of the bonding area, and then fix the bonding area to avoid misalignment. Do not cross the covers of A and B agents, and do not pour the removed glue back into the original container to prevent contamination of the original glue.

 

Transportation and storage conditions of super strong epoxy resin AB adhesive

Transportation: There are no regulations in China (CN-GB) or internationally (IMO, IATA, UN). It belongs to non hazardous goods.
Storage: Products packaged in boxes should be stored in a cool and dry environment with an ambient temperature below 25 ℃. The surrounding air should be free of acidic, alkaline, or other corrosive gases. Under these conditions, the product can be stored for 12 months from the production date, and the material remains qualified within these 12 months.

 

Precautions for super strong epoxy resin AB adhesive

This product has a slightly irritating odor. Please wear a gas mask and anti-corrosion gloves when operating. Cover at all times after each retrieval to prevent moisture absorption from affecting the curing process. Store in a cool and dry environment that is not easily accessible to children. Use this product extensively in a well ventilated area. If it accidentally gets on the skin, please wash it immediately with soap and water. If it accidentally gets into your eyes, please rinse thoroughly with plenty of water and seek medical attention immediately.

 

Technical Parameter

固化前性能

SD805

抗冲击环氧AB

805 A

805 B

外观/颜色

透明

透明

粘度(mPa.s 25℃)

8000-12000

12000-18000

比重 (g/ml 25℃)

1.01.05

1.01.05

配比(重量比 pbw

11

常温凝胶时间25℃20g

5分钟

固化后性能

 

 

 

 

 

SD805

硬度(邵氏 D

75/80

环氧当量(g/eq

185/190

/

活泼氢当量 g/eq

/

190

热变形温度 HDT

80

体积电阻率(.cm

3.0×1012

表面电阻率(.cm

2.0×1014

对不同材料的剪切强度(Mpa

/

1618

/玻璃

1719

ABS

67

 

Packaging specifications for super strong epoxy resin AB adhesive

① The packaging of materials has a certain protective and sealing effect on the materials, ensuring that they are not damaged during transportation.
② The packaging box should have product model, name, quantity, manufacturer's trademark, production batch, and other information.
③ The packaging box should meet the requirements of moisture resistance, shock resistance, pressure resistance, and mold resistance.
④ AB group 2kg, AB group 50ML.

Product description


Key words:

Related products

undefined

undefined

Get free product quotes

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline: 0752-6822862
%{tishi_zhanwei}%