Two liquid epoxy resin AB adhesive, electronic cigarette adhesive 3002

Two liquid epoxy resin AB adhesive, electronic cigarette adhesive 3002

一、3002 epoxy resin AB adhesive

This product is a two liquid epoxy resin adhesive

(一)、Character:

Type of adhesive	（Main agent）	（hardener）
color	Slightly yellowish transparent	Brown transparent
appearance	Liquid	Liquid
Viscosity cps/25 ℃	10000-15000	40000-50000
proportion	1．17	0．97
Principal component	BISPHENOL-A	POLYAMIDE

(二)、Usage:

1、After mixing the main agent and hardener in a ratio of 1:1, stir evenly, apply to the substrate, and press lightly with adhesive.

2、Appropriate surface treatment: If there is oil or grease on the surface of the substrate, it must be removed or ground to remove it. Plastic or rubber surfaces must also be treated appropriately.

3、Usable time: Depending on the amount used and the temperature range, it is generally below 20 ℃. The usable time for 100g is 1.5 hours, and the drying time for the film is 5 hours.

(三)、References:

The heat deformation temperature of the hardened body after hardening is 60 ℃, and it will lose adhesion when reaching 90 ℃, but it will not embrittle and lose adhesion when it reaches -10 ℃ in cold winter.

material quality
Tensile force
condition

Aluminum sheet - Aluminum sheet

White iron - White iron

ABS——ABS

Wood - Wood

Tensile shear strength

160℃*30分

120kg/cm2

100kg/ cm2

60-70kg /cm2

材破

Normal temperature for one day

90/ cm2

80kg/ cm2

50kg/ cm2

80kg/ cm2

Normal temperature for seven days

120kg/ cm2

95kg/ cm2

60-70kg /cm2

Material breakage

Type 3002A is a versatile basic epoxy resin, obtained by polymerization of Bisphenol-A and Epochlorohydrin in different proportions. It has an excellent epoxy based structure and is widely used in coatings, civil and military construction, electrical insulation materials, adhesives, stabilizers, and other fields.

Amine valence

Viscosity

CPS/25℃

mix proportion

PHR

Usable time

hardening time

characteristic

use to

50±20

000~12000

100：100

Overspeed, low-temperature hardening, high toughness, high bonding strength, good resistance to drugs and electrical resistance

Used for rapid fixation and subsequent use of metals, glass, ceramics, wood, electronic parts, and plastics.

Explanation: Mix ratio (PHR): refers to the amount of hardener required when the epoxy resin equivalent is 100.

Product name: Epoxy resin 3002 AB adhesive

composition	%	Hazard degree
epoxy resin	25%	无
bisphenol a	25%	无
Polyamide resin	25%	无
Denatured polyamine	10%	无
Amino polyamine	10%	无
catalyzer	5%	无

Physicochemical properties

boiling point	82．5℃	Vapor pressure	34mmHg
Vapor Density	2．1	proportion	0．93士0.02
physical state	Liquid state	melting point	89.5℃
Water solubility	15%
smell	Alcoholic aroma
volatilization rate	15-20

Storage Procedure: Direct sunlight or high heat are strictly prohibited, and contact with water, acid, or alkali is avoided.
Toxicity and health hazards: No harmful polymers.

Inquiry

Product description

Key words：

SANDAO

400-066-0768
TEL: 0752-6822862 682668251

ADD:Yanjiang Road, Zhouliao Zai Industrial Zone, Boluo Garden, Huizhou City