One-component UV light-curing adhesives, acrylic adhesives

 Introduction to one-component UV light-curing adhesives


SD622-59 is a one-component, UV-curable, acrylic adhesive. This product is specially designed for the bonding, fixing and coating protection of electronic components; The product has the characteristics of medium viscosity, good weather resistance, and good strength to difficult-to-stick substrates.

 

 Pre-curing product performance of one-component UV light-curing adhesives

 Appearance - colorless, transparent, viscous liquid


Viscosity (25°C, rotational viscometer) – 9000-11000 mPa·s

 (GB/T 2794-2013)

 Specific gravity (@25°C) – 1.08

 (GB/T 13354-1992)

 

 Cure conditions for one-component UV light-curing adhesives


SD622-59 cures under sufficient UV exposure, and the speed and depth of the cure depends on the light intensity, the spectral distribution of the light source, the irradiation time, and the light transmittance of the adhered material. The following data were measured under UV radiation of 20 MW/cm2 from a high-pressure mercury lamp:

 Surface drying time (1mm)——/

 Deep curing time (1mm) - 10 S

 Full curing energy (1 mm) – 400 mJ/cm2

 

 Product performance of one-component UV light-curing adhesives after curing


The following data were measured after curing with a cumulative energy of 400mJ/cm2 from a high-pressure mercury lamp source:

 Hardness (Shore D) - 65-70

 (GB/T 2411-2008)

 Bonding substrate (1 cm2) – bond strength

 PC/ABS - shear strength ≥ 5MPa

 PC/ABS – peel strength ≥ 30N/cm

 

 Electrical properties of one-component UV light-curing adhesives

 Dielectric constant (100 MHz) – 3.08

 (GB/T 1409-2006)

 Dielectric loss (1MHz) – 0.03

 (GB/T 1409-2006)

 Dielectric strength (KV/mm) - 26.7

 (GB/T 1408.1-2016)

 Surface resistivity (Ω) – 1.49×1016

 (GB/T 31838.3-2019)

 Volume resistivity (Ω.cm) - 4.64×1014

 (GB/T 31838.2-2019)

 

 Weather resistance test of one-component UV light-curing adhesive


The following data were measured after curing with a cumulative energy of 400mJ/cm2 from a high-pressure mercury lamp source:

 

 Storage conditions for one-component UV light-curing adhesives

 substrate

 Test conditions

 Bond Strength Retention (%)

 PC/GLASS

 65℃ 90% RH (72H)

80

 PVC/GLASS

 65℃ 90% RH (72H)

75

 Stainless steel/PVC

 65℃ 90% RH (72H)

82

 Stainless steel/GLASS

 65℃ 90% RH (72H)

92


Please store in a cool and dark place, please close the cap after opening the cap, and do not pour the glue back to the original bottle before it is used up. The best storage temperature is 8-28°C, too high or too low will affect the performance of the glue, and the shelf life is 8 months.

 

 statement


Users must carefully read the relevant information of this product before using this product, and it is the user's responsibility to conduct a comprehensive test according to their respective uses to confirm its performance, effect, safety, etc.


We disclaim any other warranties stated or implied. If the product is unqualified due to the direct use of your company without the corresponding performance test, the company and the intermediate sales legal person do not assume any responsibility, hereby declare!

Product description


Key words:

Related products

undefined

undefined

Get free product quotes

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline: 0752-6822862
%{tishi_zhanwei}%