SD401A one-component cyanoacrylate adhesive with excellent performance and instant curing instant adhesive

Model:SD401A Instant Glue

SD401A is a one-component cyanoacrylate adhesive with excellent properties, it is solvent-free, does not require heating, cures instantaneously at room temperature and has high strength.

One-component cyanoacrylate adhesive uses

Suitable for: glass, leather, plastic, rubber, fiber, stone, metal, wood, other materials, cement products, ceramics, paper.

Technical parameters of one-component cyanoacrylate adhesives

Test items		SD401A
Chemical type		Cyanoacrylate
固 Before chemistry	appearance	Colorless and transparent
	Viscosity (mpa.s)	300
	Density (g/cm³)	1.1
After curing	Shear Strength (Mpa)	20
	Temperature Range(°C)	-55～83
Fixed time(s)		＜20
Full Solid Time (h)		24
Maximum Filling Gap (mm)		0.15

Note: It is recommended to use Mishima Instant Adhesive Accelerator SD-32 to speed up the curing speed, and the performance of Mishima Instant Adhesive Primer SD-31 or above is above 25°C, and the measurement after 3 days of full curing may vary due to changes in environment, temperature, and humidity conditions.

One-component cyanoacrylate adhesive usage

(1) Use a dry cloth or sandpaper to remove dust, oil molder, steel rust, etc. from the joint, and then wipe it with acetone or trichloroethylene to clean the joint.

(2) Open the front cover, flick the tip with your fingers so that there is no residual liquid, and then poke the hole with the attached needle.

(3) Drop a small drop of adhesive on the surface to be connected, immediately carry out the following, and keep it until hardening, ranging from a few seconds to several minutes when hardening; It takes about 30 minutes to reach practical intensity, and after 24 hours it reaches its maximum intensity.

(4) Wipe the tip of the container after use and close the lid.

Precautions for one-component cyanoacrylate adhesives

(1) The steam of this adhesive will puncture the mucous membranes and eyes.

(2) When touching your hands, you can wash it with soap, water, and pumice. Otherwise, it will condense in your hands after a while. It will take a few days to recede.

(3) Avoid contact with skin and eyes, if accidental, wash immediately with plenty of water and seek medical attention immediately.

Requirements for packaging, storage, and transportation of one-component cyanoacrylate adhesives

One-component cyanoacrylate adhesive is packed in plastic bottles, with specifications of 20g/bottle, 1000g/bottle, this product should be stored in a dry and cool place (below 25°C). This product has a shelf life of up to 12 months from the date of manufacture.

One-component cyanoacrylate adhesive declaration

The technical data involved in this article are obtained under laboratory standard conditions, and the company guarantees that they are reliable, but they are not used as product acceptance criteria and are for reference only. Due to the different working conditions, material conditions and curing conditions of users, it is normal for some changes in actual performance data. Storage conditions, transportation and other factors will affect the stability and mechanical properties of the glue. We are not responsible for the results obtained by anyone using methods beyond our control.

It is recommended that users do a good test based on the data provided in this article before using it.

It is hereby declared!

Inquiry

Product description

Key words：

SANDAO

400-066-0768
TEL: 0752-6822862 682668251

ADD:Yanjiang Road, Zhouliao Zai Industrial Zone, Boluo Garden, Huizhou City