SD460 plastic flexible instant adhesive, electronic and electrical low adhesive strength instant adhesive

 Model:SD460 Instant Glue


Characteristics of plastic flexible instant adhesive: low odor, low adhesive strength, no whitening, soft type, excellent impact resistance for metal and other rigid materials.

 

 use


Plastic flexible instant adhesive is suitable for: plastic, metal, electronics, electrical appliances and other products with high appearance requirements.

 

 Technical parameters of plastic flexible instant adhesive

 Test items

 SD460

 Chemical type

 Alkoxy group

 Before chemistry

 appearance

 Colorless and transparent

 Viscosity (mpa.s)

45

 Density (g/cm³)

     1.1

 After curing

 Shear Strength (Mpa)

18

 Temperature Range(°C)

 -55~83

 Fixed time(s)

 <30

 Full Solid Time (h)

24

 Maximum Filling Gap (mm)

0.10


Note: It is recommended to use Mishima Instant Adhesive Accelerator SD-32 to speed up the curing speed, and the performance of Mishima Instant Adhesive Primer SD-31 or above is above 25°C, and the measurement after 3 days of full curing may vary due to changes in environment, temperature, and humidity conditions.

 

 Plastic soft type instant glue usage


(1) Use a dry cloth or sandpaper to remove dust, oil molder, steel rust, etc. from the joint, and then wipe it with acetone or trichloroethylene to clean the joint.


(2) Open the front cover, flick the tip with your fingers so that there is no residual liquid, and then poke the hole with the attached needle.


(3) Drop a small drop of adhesive on the surface to be connected, immediately carry out the following, and keep it until hardening, ranging from a few seconds to several minutes when hardening; It takes about 30 minutes to reach practical intensity, and after 24 hours it reaches its maximum intensity.

 (4) Wipe the tip of the container after use and close the lid.

 

 Precautions for plastic soft instant adhesive

 (1) The steam of this adhesive will puncture the mucous membranes and eyes.


(2) When touching your hands, you can wash it with soap, water, and pumice. Otherwise, it will condense in your hands after a while. It will take a few days to recede.


(3) Avoid contact with skin and eyes, if accidental, wash immediately with plenty of water and seek medical attention immediately.

 

 Packaging, storage, and transportation requirements


SD460 plastic soft instant adhesive, electronic and electrical low adhesive strength instant adhesive packaging in plastic bottles, specifications are 20g/bottle, 1000g/bottle, this product should be stored in a dry and cool place (below 25 °C). This product has a shelf life of up to 12 months from the date of manufacture.

 

 SD460 Plastic Flexible Instant Adhesive Statement


The technical data referred to in this article have been obtained under laboratory standard conditions and are guaranteed to be reliable, but not as such


Product acceptance criteria, for reference only. Due to the different working conditions, material conditions and curing conditions of users, it is normal for some changes in actual performance data. Storage conditions, transportation and other factors will affect the stability and mechanical properties of the glue. We are not responsible for the results obtained by anyone using methods beyond our control.


It is recommended that users do a good test based on the data provided in this article before using it.

 It is hereby declared!

Product description


Key words:

Related products

undefined

undefined

Get free product quotes

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline: 0752-6822862
%{tishi_zhanwei}%