SD202 high temperature tearable solder mask, natural glue paste solder mask

 Model: SD202 High Temperature Tearable Solder Mask


Characteristics: High-temperature tearable solder mask is composed of natural glue, which is a new type of solder mask product that replaces traditional high-temperature tape. It is applied to the coated area of the circuit board until it is to be removed, and it can be gently removed by hand or tweezers, leaving no adhesive residue, and the short-term temperature resistance is up to 280°C. It will not oxidize gold, copper, phosphorus and bronze, do not corrode parts, prevent pollution during assembly, do not stick to tin, do not explode tin, can be completely decomposed by microorganisms, and meet environmental protection requirements.

 Environmental protection requirements: in line with RoHS directives and related environmental protection requirements

 

 High temperature tearable solder mask application


It is widely used in a variety of products that require temporary soldering, protection and masking, such as wave soldering and coating processes.

 

 Performance index (At TA=25°C)

 Appearance: —— White


Viscosity (CPS 25°C) – 50000-75000

 Relative density (g/cm3) - 0.98


Drying time (25°C, 2mm thick) – 1 hours


Drying time (60°C, 2 mm thick) – 30 min

 Solids content (%) - 70-75%

 Ammonia content (%) – <1

 Tensile strength (MPa) – 0.5

 Elongation at break: (%) - 8 0 0

 

 How to use and precautions

 A guide to the use of high-temperature tearable solder mask


1. Clean the surface: clean the surface of the coating to remove rust, dust and oil.


2. Construction: Open the cap first, then cut off the tip of the cap, and then squeeze and coat it by hand after cutting the hole, or open the cap directly and apply it to the surface of the product with a brush.


3. Solidification: 2mm thick adhesive layer, which can be dried at room temperature for about 2 hours, or baked at 60 °C for 30 minutes.

 

 Precautions for high-temperature tearable solder mask


1. This product should be avoided for more than 2 hours at a temperature of 94°C~120°C; It should be avoided for more than 1 hour at the temperature of 120 °C~149 °C.

 2. Do not pour the poured glue back to the original packaging to avoid contaminating the glue.


3. Do not store in the refrigerator or at high temperature, and store it at room temperature in a light-tight container.

 4. Keep away from children.


5. This product contains a slight odor, slightly irritating to the skin and eyes, if accidentally splashed into the eyes, please rinse immediately with a large amount of water, if there is still discomfort, you must go to the hospital for examination; Rinse immediately after skin contact with soap and plenty of water.


6. For more safety precautions for this product, please refer to the company's Material Safety Data Sheet (MSDS).

 This product is not dangerous goods, but do not enter and eyes.

 

 Packaging, storage, and transportation requirements


Transportation: There are no regulations for domestic (CN-GB) and international (IMO, IATA, UN). It is a non-dangerous good.

 Wrap:


(1) The packaging of the material has a certain protective and sealing effect on the material to ensure that the material is not damaged during transportation.


(2) The packaging box should have product model, name, quantity, manufacturer's trademark, production batch and other information.

 (3) The packing box should meet the requirements of moisture-proof, shock-proof, pressure-proof and mildew-proof.


Storage: Store in a dry, cold (between 5°C and 25°C) environment for 6 months.

 Packing: 250ml/bottle, 5L/barrel.

 

 High Temperature Tearable Solder Mask Declaration


Users must carefully read the relevant information of this product before using this product, and it is the user's responsibility to conduct a comprehensive test according to their respective uses to confirm its performance, effect, safety, etc.


We disclaim any other warranties stated or implied. If the product is unqualified due to the direct use of your company without the corresponding performance test, the company and the intermediate sales legal person do not assume any responsibility, hereby declare!

Product description


Key words:

Related products

undefined

undefined

Get free product quotes

Our staff will contact you within 24 hours (weekdays), if you need other services, please call the service hotline: 0752-6822862
%{tishi_zhanwei}%