The use of screw glue


Release time:

2023-01-12 11:11

Screw glue, also known as screw fixing agent or anaerobic glue, is mainly used in electrical appliances, electronics, aviation machinery, automobile industry. You'll see it everywhere you have a screw.

Screw glue, also known as screw fixing agent or anaerobic glue, is mainly used in electrical appliances, electronics, aviation machinery, automobile industry. You'll see it everywhere you have a screw. Generally it is to lock the screw and point it on the mother screw. Let it set slowly. On the one hand, the screws will not fall off in the operation. On the other hand, it has the effect of rust prevention. If repairs are needed in the future. We just need another 30 percent more power to remove it. Glue can also be applied to the screws. And then you lock it. This will work better. But it's a little more difficult at work. Generally most of the product is done. Finally, glue is fixed to each screw. Let it cure naturally. About 10 minutes after normal dispensing. The surface is not touching. Full curing takes about 6-8 hours.

Physical characteristics

1. Prevent loosening of screws, bolts, wire drawing, nuts, etc.

2, the screw rust coating can prevent the corrosion and rust of the screw part.

3, can withstand vibration and impact, use does not need special technology and tools, who can be simple to use.

4, the liquid form can be applied to all shapes of screws, not because of design changes and can not be used.

5, can reduce the loose parts, machine bad loss, and improve the trust of the machine, parts.

6, liquid penetration is very good, so it can be soaked to the bottom of the screw, can completely prevent loosening and leakage of the screw bottom.

7, has a strong "anti loosening" effect, on the contrary, can also make loosening become simple and easy.

8, will not be plastic, paint surface and other things erosion, so can be safe to use.