Method of removing screw glue


Release time:

2023-02-07 10:34

Coated with good screw glue products sometimes need to be removed during maintenance, different screw points on different screw glue, its disassembly method is different.

Coated with good screw glue products sometimes need to be removed during maintenance, different screw points on different screw glue, its disassembly method is different.

1. Small screws (m2-m12) can be used with low strength screw glue products, after disassembly only with relatively large torque can destroy the glue layer, if you want to often disassembly and maintenance products can also be used with low strength screw glue, forcibly removed after cleaning the residual glue with alcohol, you can be twice coated.

2 medium size screw (m12-m20) can be used with medium strength and high strength of the screw glue, medium strength with torsion damage adhesive layer can be removed, high strength is not good disassembly, you can use the method of heating to remove.

3 large screws (more than M20) are made of high strength screw glue, of course, it is more difficult to disassemble, can be used to heat the screws, heating while twisting, slowly can be opened. Solvents are also used to bubble, but the time is long, and the effect is not obvious.

Matters needing attention

1, please use can prevent evaporation container sealed, please do not put in a particularly hot or cold place.

2. With flammability, please place it in a safe place to avoid putting it in a place with water vapor.