The use of AB glue


Release time:

2021-11-12 11:01

at room temperature (25℃) will be adhesive treatment clean, and then A glue and B glue with A 1:1 ratio of overlapping coating or in a adhesive coated A glue, another adhesive coated B glue, and then stick together, before and after 2-3 times of run-in fixed 5-10 minutes.

1, at room temperature (25℃) will be adhesive treatment clean, and then A glue and B glue with A 1:1 ratio of overlapping coating or in a adhesive coated A glue, another adhesive coated B glue, and then stick together, before and after 2-3 times of run-in fixed 5-10 minutes.

2. At room temperature (25℃), the adhesive will be treated clean, and then the A glue and B glue will be mixed with plastic material sheet in a 1:1 ratio by visual inspection. Within 3 minutes, the adhesive surface will be coated, and the fixed 5-10 minutes can be positioned.

The glue can reach 50% of the highest strength after 30 minutes of bonding, and reach the highest strength after 24 hours. It can be used in -60℃-100℃ environment.

Note, do not mix a large amount of glue liquid at one time, cut should be kept well ventilated, glue liquid with acrylic smell, do not enter. Keep it out of the reach of children. Do not put the glue cap on incorrectly after use.